PR V Series (Vacuum furnaces)
HOBERSAL Furnaces For Metal and Ceramic 3d Printing Processes and Additive Manufacturing
Ceramic and metal Sintering, Annealing, debinding, fusing, curing
Works under vacuum and controlled atmosphere to ensure the sintered part is not contaminated by oxygen
3D Additive manufacturing
- Metals sintering: Debinding, sintering, stress-relieving, solution annealing and hardening
- Ceramics, Glass, Composites, Sand sintering: Debinding, sintering, drying and curing
- Plastics sintering: Curing, tempering, drying
- Temperatures 1.150 ºC
HCV-CCH
Heat treatment / Thermal Process /Controlled atmosphere furnace
- Temperatures 1.200 ºC
- Inert atmosphere works
- Silicon joint refrigerated by water
- Gas inlet on rear
- Side door
- Let work 24/7 in continuous mode
- 3 or 4 heating zones
- Low thermal mass insulation
- Built with low density ceramic bricks and ceramic fiber
- Double isolation chamber
- Outside casing in metal sheet painted ( inox as optional)
PR SCH Series
Heat treatment / Thermal Process
- Temperatures 1.150 ºC
- Inert atmosphere works
- Ceramic joint
- Inlet gas entry
- Side door
- Let work 24/7 in continuous mode
- 3 or 4 heating zones
- Low thermal mass insulation
- Built with low density ceramic bricks and ceramic fiber
